Scania G 440 LB
19.400 €
Kamion rol kiper
2011
893614 km
Mađarska, Budapest
Oglas Scania R560 V8 Darus emelőhorgos, ágaprítóval Palfinger Epsilon kamion rol kiper je prodan i ne učestvuje u pretraživanju!
Slični oglasi
Scania G 440 LB
19.400 €
Kamion rol kiper
2011
893614 km
Mađarska, Budapest
Volvo FL 290
48.100 €
Kamion rol kiper
2011
451200 km
Mađarska, Budapest
Volvo FM 410
31.300 €
Kamion rol kiper
2011
596558 km
Mađarska, Budapest
MAN TGS 26.480
144.910 €
Kamion rol kiper
2014
317200 km
Mađarska, Budapest
Volvo FMX 460 Emelőhorgos
67.300 €
Kamion rol kiper
2011
390000 km
Mađarska, Budapest
Prodato
1/30
Marka:
Scania
Model:
R560 V8 Darus emelőhorgos, ágaprítóval Palfinger Epsilon
Tip:
kamion rol kiper
Godina proizvodnje:
2011
Kilometraža:
205000 km
Ukupna težina:
38000 kg
Lokacija:
Mađarska Budapest
Mađarska Budapest
Datum objavljivanja:
više od 1 mjeseca
Kataloški broj prodavca:
MOM2393
Karoserija
Kutija za alate:
Motor
Snaga:
560 k.s. (412 kW)
Gorivo:
dizel
Mjenjač
Tip:
automat
Kočnica
ABS:
Kabina
Mjesto za spavanje:
Hidraulični servo upravlljač:
Motorola:
Auto grijač:
Webasto
Vazdušni jastuk:
Putni računar:
Imobilizator:
Klima uređaj:
Autoradio:
CD
Frižider:
Cruise-control (tempomat):
Tahograf:
Električni podizači stakala:
Elektronsko podešavanje ogledala:
Centralna brava:
Pomoćni farovi:
Stanje
Stanje:
polovne
Scania rol kiperi sa kukom
Pronađeno:
337 oglasa
Leírás:
For sale Scania R560 V8 + PALFINGER crane + hook lift with a WUST HACER KAE100 chipper.
SCANIA:
Year of production - 2011
Mileage - 205,000 km
Weight with chipper - 38 tons (after heavy battles with ITD, I was able to obtain a permit to move on Polish roads - a very valuable document, I attach it to the vehicle).
Equipment - webasto, light alloy wheels, fridge, bed, CB radio, air conditioning, cushions on two rear axles.
CHIPPER:
Year of production - 2004
Number of hours worked - 11 400 mth
VOLVO PENTA engine power 400 km
Throat size: width - 100 cm, height - 80 cm
The machine was purchased in December 2021. For the next 4 months it was fully regenerated with the intention that it would serve me for the next good years. The machine comes from Switzerland and until the last day it was serviced by an authorized service (I know, because when I bought parts, they knew everything about the machine).
The scope of works performed in SCANI and the crane:
- sealing the entire engine,
- replacement of the set of rollers and the belt at the front of the engine,
- regeneration of pump-injectors,
- regeneration of the catalyst,
- replacement of the steering spacer with a new - original one,
- replacement of oil and filters in the engine, gearbox, diffs and spindles,
- webasto repair,
- refrigerator repair,
- bed assembly,
- replacing the front lamps,
- checking the brake system (I replaced the shoes on two axles),
- replacing 12 tires (new, blue ribbed) - the distance traveled is about 4000 km,
- replacing the set of hydraulic hoses in the crane,
- replacing filters and hydraulic oil,
- sealing of all 4 supporting legs,
- rotation regeneration,
- repair of air conditioning in the crane.
The scope of works performed in the chipper:
- replacement of a set of hydraulic hoses,
- replacement of all bearings (there were many of them),
- replacement of fan blades,
- replacement of a set of rollers and a belt at the front of the engine,
- radiator repair,
- replacement of the structure of the hook lift point (it was cracked),
- sealing of the exhaust manifold,
- replacement of the control computer - I installed the original WUST,
- replacement of belts,
- repair of feeders (new widies - 110 pcs in total),
- new counter knife and table,
- inspection engine by an authorized VOLVO service (valve setting, injector control, computer connection).
I add to the machine:
- the entire contents of the boxes (keys, small grinder, dedicated counter knife key, converter, oil, grease, etc.),
- knife sharpening table,
- 3 types of sieves (3x3, 4x4, 5x5),
- contacts on robots