Nova Schutzgeländerzwinge oplata
Zainteresovani ste za oglas?
1/6
20,50 €
Cijena bez PDV-a
24,60 €
Cijena s PDV-om
Tip:
oplata
Lokacija:
Austrija Neumark
Datum objavljivanja:
više od 1 mjeseca
Machineryline ID:
DA17247
Stanje
Stanje:
novi
Potrebna vam je dostava?
Izračunajte troškove isporuke
Važno
Ova ponuda је informativnog karaktera. Za više detalja, pitajte prodavca.
Savjeti za kupovinu
Kontakti prodavca
Berger Construction Equipment GmbH
Na lageru:
31 oglasa
6 godina na Machineryline
4.9
9 komentara
Telefonski brojevi su provjereni
Used as fall protection for balcony slabs, free edges, bridge cornices. The handrail clamps meet the requirements of the "Principles for the testing of side protection components" according to BGG 928 (04/1994) for operating heights of up to 40 m above ground.
The 3-part side guard is completed with boards 15 x 3 cm.
- Maximum safety with easy assembly
- no squared timber waste
- fall protection
- clamp is pressed onto ceiling by means of threaded rod and nut and can be used for ceilings up to 40 cm thick.
- The mechanism is located inside the guardrail clamp and is therefore well protected and durable.
- By convenient cranking at a handy height, the guardrail clamp can be fixed effortlessly.
- For fall protection, a board can be hooked into the hook provided.
- To fix the board, there is a hole in the hook, which is suitable for nailing the board.
Galvanized
Weight: 7,0 kg
Anwendung als Absturtzsicherung bei Balkonplatten, freien Rändern, Brückengesimsen. Die Schutzgeländerzwingen entsprechen den Anforderungen der "Grundsätze für die Prüfung von Seitenschutzbauteilen" nach BGG 928 (04/1994) für Einsatzhöhen bis 40 m über Gelände.
Der 3-teilige Seitenschutz wird mit Brettern 15 x 3 cm vervollständigt.
• höchste Sicherheit bei einfacher Montage
• kein Kantholzverschnitt
• Absturzsicherung
• Zwinge wird mittels Gewindestange und Mutter auf Decke aufgepresst und kann für Decken bis zu 40 cm Dicke verwendet werden.
• Die Mechanik befindet sich im Inneren der Schutzgeländerzwinge und ist somit gut geschützt und langlebig.
• Durch bequemes Kurbeln in handlicher Höhe kann die Schutzgeländerzwinge mühelos fixiert werden.
• Zur Absturzsicherung kann ein Brett in den dafür vorgesehenen Haken eingehängt werden.
• Zur Fixierung des Bretts befindet sich eine Bohrung in dem Haken, die sich zum Vernageln des Brettes eignet.
Verzinkt
Gewicht: 7,0 kg